Product Specifications
Please review this guide carefully to ensure safe and optimal use of your Soothie Bottle, helping prevent any mishaps or damage.
Worried about hot water bottle safety?
All Soothie products meet Australian Standards (AS/NZS) with BS 1970:2012 compliance.
Soothie meets Aussie Standards—tested leak-proof for worry-free warmth during cramps. Empower your cycle!
Charge in 8 mins, soothe for 10 hrs—Soothie’s AS/NZS-tested design means safe, portable relief for muscle aches. Ditch cords, embrace ease!
Eco-friendly & rigorously tested to Australian Standards: No harmful leaks, just pure, planet-kind warmth for chronic flares.
KEY SAFETY NOTES
Always follow these guidelines for heating and retain this manual for reference.
- Not suitable for unsupervised use by those who can't manage it independently, babies, or individuals with heat sensitivity.
- During charging, position the bottle horizontally on a flat surface to prevent overheating or failure.
- Your Soothie Bottle arrives factory-sealed with liquid inside—do not attempt to add or remove any fluids.
- Avoid applying pressure or weight to avoid potential rupture and scalding from hot contents.
- Never use while sleeping or in bed, as it may lead to burns. Limit direct skin exposure to short periods.
HOW THE SOOTHIE BOTTLE OPERATES
Your Soothie Bottle is ready-to-use, fully sealed, and crafted from multiple layers of durable PVC, enveloped in plush, cozy fabric for ultimate comfort.
- Connect the charger and wait 8-12 minutes for full warmth (time varies with room conditions).
- The charger's red light will extinguish when heating is complete.
- Disconnect the charger and relish in 1-6 hours of gentle heat (duration depends on surroundings).
ENGINEERING SPECIFICATIONS
Your Soothie Bottle is fully sealed from the start, built with robust PVC layers and a soft, inviting fabric cover.
N10
220-240V
380-450W
50-60Hz
100% H20
8 Minutes
4-10 Hours
70 Degrees Celsius
270x180x50mm
1160~1210g
AU/NZS
PC+PVC+ABS
GMA-123456-EU
AS/NZS 60335.1:2020+A1:2021, AS/NZS 60335.2.81:2015+A1-3
STEP-BY-STEP USAGE
1) Place the bottle level on a steady surface, detach any straps, and lift the protective cap. Position the charger flat, connect it to the bottle's port, then plug into an outlet. Activate the charger's switch—the red light signals heating (refer to Illustration 1).
2. When the light goes out, deactivate the switch, unplug from the wall, grasp the bottle's port and charger firmly, and separate gently. Secure the cap, and your bottle is primed for use (refer to Illustration 2).
HIGHLIGHTED FEATURES
The Soothie Bottle is an advanced, water-electric isolated rechargeable warmer, compliant with top safety protocols like AS/NZS standards. Engineered to national benchmarks for peace of mind, here's what sets it apart:
- Innovative water-electric isolation with insulated silicone wiring ensures no current in the fluid, delivering even warmth efficiently.
- Made with sustainable, gentle textiles for a luxurious feel.
- Efficient 400W design heats quickly in 8-12 minutes to about 70°C, maintaining coziness for 1-6 hours based on environment and application.
- Three-layer safety shield: smart temperature control, manual power switch, and thermal cutoff for reliability.
- Enhanced durable PVC construction for superior comfort and longevity.
- Advanced seamless sealing withstands up to 80kg pressure; outer layer resists tears over 12.5N with zero leaks.
- Adheres to International Electrotechnical Commission safety norms.
ESSENTIAL PRECAUTIONS
- Unsuitable for solo use by babies, kids, self-care challenged individuals, heat-sensitive people, or those without proper know-how—supervise with a responsible adult.
- Not a plaything; keep away from little ones treating it as such.
- Children require adult setup or instruction before use.
- Stick to the included charger; no substitutes allowed.
- Avoid microwaving, boiling, or alternative heating methods.
- Skip machine washing or drying.
- Prevent shock: keep all parts dry, away from liquids.
- No dry charging; inspect for wear/damage before each use—halt if found.
- Disconnect before using; charge only with port upright.
- Unplug post-heating for safety.
- No items on top during charging or storage.
- Cool fully to ambient temp before stowing.
- No water rinsing or harsh chemical scrubbing like gasoline or solvents.
- Steer clear of sharp items; no pressing, hitting, or forcing.
- Damaged cords? Manufacturer replacement only to avoid risks.
- Faulty? Reach out to us—don't dismantle or modify.
- Avoid near water sources like baths, showers, or pools.
- Charge out of kids' reach.
- Brief skin contact only to dodge burns.
- Charge flat; upright or tilted risks burnout.
- Not for animal warming.
- For feet: remove outdoor footwear first.
- Initial mild odor or bubbling noise is typical during heat-up.
- No user fluid adjustments—factory-sealed only.
- Routine checks for damage; discontinue if spotted.
HELPFUL HINTS
- If no heat (light off), safety feature may be active—cool down and retry.
- Pre-filled at production; no user liquid changes.
- Extended use may cause internal gas buildup and swelling; auto-shutoff signals time for replacement if not heating fully.
Still wondering something? Drop us a line!
WARRANTY DETAILS
- Coverage lasts one year from purchase date (per invoice; excludes accessories). If a defect is verified as non-user-related during this time, we'll repair or replace at no cost—though shipping fees apply if not a factory issue.
- Shipping costs are your responsibility for:
A. Issues from misuse, accidents, transport damage, or incorrect voltage.
B. Problems due to unauthorized alterations, repairs, or ignoring guidelines.
Get In Touch
Do you still have questions?
Our dedicated Soothie crew is committed to your satisfaction.
For product assistance, email hi@soothiebottle.com or submit via the form. We strive for replies in 48 hours.
Support available: Monday-Friday, 9AM - 6PM.
We also have a 24hr online support team to assist you should your requests be urgent.
Quick fix? Peek at our FAQs.